手扳葫芦系列|辰力吊索具
LEVER BLOCK SERIES|CHENLI RIGGING

HSH-X型手扳葫芦

HSH-X LEVER BLOCK

贝斯特bst3388 www.retirementinprescott.com 贝斯特bst3388公司新产品--X系列手扳葫芦,较普通产品具有以下特点:

1.空载时利用离合弹簧使链条可自由拉动,精密铸钢手轮带三角形限位凸点,作业时避免葫芦链条下降到底部时,预防重物自由滑落的an全隐患;

2.左右墙板配置整体轴承,起重链轮为整体轴承形式配合,运转灵活,手拉力畅快轻盈;

3.内部齿轮传动件均采用合金钢和严格的渗碳热处理工艺,相比传统工艺增加了齿轮的抗耐磨性;

4.冲压式导链板,使链条导向更顺畅,防护效果更佳;

5.采用高 强度G80辰力专 利链条。


产品详情

Our company’s latest products.X Series lever block. Comparedwith common products,they have the following characteristis.

1. Use the clutch spring to make the lifting chain free to pull when no load,precision cast steel hand wheel with triangular limit bump,avoid the safety hazard of the lifting chain dropping to the bottom and the heavy object sliding down freely during operation;

2. The left and right wall plates are equipped with integral bearings,and the lifting sprocket is in the form of integral bearings to match,so that the operation is flexible and the hand pull is smooth and light;

3. The internal gear transmission parts are all made of 20CrMnTi alloy steel and strict carburizing heat treatment process,which increases the wear resistance of the gears compared with the traditional process;

4. The stamping type chain guide plate makes the chain guide more smoothly and the protection effect is better;

5. Use high strength T8 European standard lifting chain.



产品介绍


上一篇:暂无

下一篇:HSH-V型手扳葫芦